Copyright ? 2010-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree?, the Cree logo and XLamp?
are registered
trademarks of Cree, Inc.
8
XLamp mL-B LEDs
storage conditions
XLamp mL-B LeDs that have been removed from the original mBB packaging but not soldered should be stored in one
of the following ways:
?
Store the parts in a rigid metal container with a tight-ftting lid. Verify that the storage temperature is <30
°C, and
place fresh desiccant and an RH indicator in the container to verify that the RH is no greater than 60%.
?
Store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30° and
the RH at no greater than 60%.
?
For short-term store only: LeDs can be resealed in the original mBB bag soon after opening. Fresh desiccant may be
needed. Use the included humidity indicator card to verify <60% RH.
If an environment of <60% RH is not available for storage, XLamp ML-B LEDs should be baked (described above) before
refow soldering.
rohs
compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to
as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU
Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained
from your Cree representative or from the product ecology section of www.cree.com.
reach compliance
REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical
Agency (ECHA) has published notices of their intent to frequently revise the SVHC listing for the foreseeable future,
please contact a Cree representative to insure you get the most up-to-date REACh Declaration. Historical REACh banned
substance information (substances restricted or banned in the EU prior to 2010) is also available upon request.
ul
recognized component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fre and electrical
enclosure per ANSI/UL 8750.
vision advisory claim
wARNING. Do not look at exposed LeD lamps in operation. eye injury can result. For more information about LeDs and
eye safety, please refer to the Cree LED Eye Safety Application Note (www.cree.com/xlamp_app_notes/led_eye_safety).
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
MLEAWT-A1-0000-0005E3
LED XLAMP MLE WHITE SMD
MLEBLU-A1-0000-000T01
LED HIGH BRIGHTNESS
MMBD1203
DIODE FAST DUAL 100V SOT-23
MMBD1205
DIODE ULT FAST 100V 200MA SOT-23
MMBD1404
DIODE ULTRA FAST 200V SOT-23
MMBD1504A
DIODE SS 200V 200MA SOT23
MMBD2004SW-7-F
DIODE SS SW 250MW 240V SOT23-3
MMBD2004S
DIODE SWITCH 240V 350MW SOT23-3
相关代理商/技术参数
MLBAWT-A1-0000-000WF5
功能描述:大功率LED - 白色 White 23.5lm XLamp MLB LED
RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
MLBAWT-A1-0000-000WF6
功能描述:大功率LED - 白色 White 23.5lm XLamp MLB LED
RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
MLBAWT-A1-0000-000WF7
功能描述:大功率LED - 白色 White 23.5lm XLamp MLB LED
RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
MLBAWT-A1-0000-000WZ5
功能描述:大功率LED - 白色 White, 23.5Lf min RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
MLBAWT-A1-0000-000WZ6
功能描述:大功率LED - 白色 White, 23.5Lf min RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
MLBAWT-A1-0000-000WZ7
功能描述:大功率LED - 白色 White, 23.5Lf min RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
MLBAWT-A1-2A0-J0-0-00001
制造商:Cree 功能描述:
MLBAWT-A1-3A0-J3-0-00001
制造商:Cree 功能描述: